LLC "ROSSPETSSTROYPROEKT"

Mounting cups Mounting cups with integrated valves are used to install roof fans. They have heat and sound insulation walls with a thickness of 50mm., filled with compressed non-flammable ultrathin basalt fiber. They can be made for capital and soft roofs with a slope, brick shafts and other superstructures. For regions with a heavy snow load, it is possible to manufacture glasses of increased height according to ID.   The equipment is manufactured according to the Technical specifications (Checklist) A Customer for a specific Project (Object). Warranty obligations apply to all manufactured equipment. The cost, quantity and terms of manufacture (delivery) are negotiated additionally at the conclusion of the contract. Production is in the Russian Federation.

General-purpose fans There are three types available:   centrifugal; roof; axial. Centrifugal fans   Low-pressure centrifugal (radial) fans have a spiral rotary body, an impeller of 12 backward curved blades. They are manufactured in 15 standard sizes, air flow up to 85,000 m3/hour, pressure up to 3,000 Pa. The characteristics are confirmed by aerodynamic tests on the stand. Operating conditions from + 40°C to - 60 °C. They can be manufactured in general, corrosion-resistant, explosion-proof and high-temperature versions. A special series has been developed for regions with harsh climates made of stainless steel and with reliable Siemens engines in the climatic version UHL1.   Advantages:   15 standard sizes; one-way suction; spiral rotary housing; impeller made of 12 backward curved blades; air consumption up to 85,000 m3/hour; pressure up to 3000 Pa; galvanized housing; special series with Siemens engines; operation from + 40 °C to - 60 °C; corrosion-resistant, explosion-proof, high-temperature design; the direction of rotation is right, left. Centrifugal fans are manufactured in accordance with GOST 5976-90 using high-quality materials and components. The housing, depending on the purpose, is made of carbon, stainless or galvanized steel. Impellers, frame, manifold and flanges are covered with paint for additional protection. The impellers and pulleys are factory balanced and equipped with quick-release hubs for easy installation and maintenance. High-temperature versions are made with cooling discs to remove heat and protect bearings and the electric motor from overheating.   Additional equipment:   flexible inserts; matching flanges; vibration isolators; safety nets; the control panel. Roof fans   Roof fans are general industrial with an upward flow of air. Low-pressure with an operating pressure of up to 1000 Pa. They are manufactured in 10 standard sizes with a capacity from 1000 to 85000 m3/h. They are installed on mounting cups or on specially made ventilation shafts. Designed for use in temperate and northern latitudes, they remain operational in conditions of negative temperatures up to -600C, which corresponds to the temperate and cold climate of the first category of accommodation according to GOST 15150.   Advantages:   10 standard sizes; Ziehl-Abegg and Punker impellers; Siemens engines; air consumption up to 85,000 m3/hour; pressure up to 1000 Pa; galvanized housing; protection against leaks; service hatch for engine maintenance; powder coated welded steel frame; operation from + 40 °C to - 60 °C; corrosion-resistant and explosion-proof design. The fans are manufactured on modern equipment using high-quality components and materials. Carbon steel parts are processed and coated with a special powder paint. Stainless and galvanized steel elements have protective properties against atmospheric influences and aggressive moving media.   The impeller of the correct geometry does not require additional balancing measures on the object, is strong and durable, has high efficiency and ideal aerodynamic characteristics. It is equipped with a quick-release hub for easy maintenance.   The fans undergo all necessary tests before shipment to the end user and comply with safety standards and environmental requirements.    Additional equipment:   control panel; mounting cup; a condensate collection tray.  Axial fans   The line of axial fans is designed for use in supply and exhaust systems of general exchange and technological ventilation of buildings and structures of various types. The design of the fans is general industrial, explosion–proof. The fan body is made of painted carbon steel, the blades are made of glass fiber reinforced polyamide.   The main sizes produced are:   4,0 4,5 5,0 5,6 6,3 7,1 8,0 9,0 10,0 11,2 12,5.   The cylindrical shell, rolled from structural steel, performs the function of the housing. Flanges with holes for bolting are provided for connecting the fan to the network ducts. The fan body is painted. Inside the housing there is an impeller with fiberglass-reinforced polyamide blades. The fan blades have an aerodynamic profile, which gives the fans high energy efficiency. A variety of impeller configurations allows you to select a fan with a minimum deviation from the specified network parameters in the entire range of the series. The impeller sleeve is pressed directly onto the rotor of an electric asynchronous motor. The fans are supplied with an external terminal box for easy connection to a three-phase 380V supply network.    The fans can be operated in regions with a temperate climate at ambient temperatures -40°C...+40°C, as well as in regions with moderately cold and cold climates -60°C...+45°From the first and second categories of accommodation according to GOST 15150-69.   The equipment is manufactured according to the Technical specifications (Checklist) A Customer for a specific Project (Object). Warranty obligations apply to all manufactured equipment. The cost, quantity and terms of manufacture (delivery) are negotiated additionally at the conclusion of the contract. Production is in the Russian Federation.

Industrial fans Industrial (industrial) fans are designed to move gas-air media in systems where high performance, high pressures, highest efficiency, high temperatures, low noise are required. Parallel or sequential installation of fans is allowed to increase air flow or pressure.   Advantages:   5 episodes; capacity up to 500,000 m3/h; pressure up to 35,000 Pa; temperature up to 5000C; 1st, 3rd, 5th connection diagram; highest EFFICIENCY; low noise level; explosion-proof and corrosion-resistant design. Depending on the series, fans can be used to transport both clean air and mixed with dust or particles of various fractions.   Fan Series:   CL – low-pressure for moving clean air; CH – high-pressure for moving clean air; SD – for moving polluted air; VD – for moving dirty air; MC – for pneumatic transport. The main connection diagrams of the electric motor and the fan impeller:   Scheme 1: direct drive through the shaft of the electric motor on which the impeller is mounted; Scheme 3: the drive is carried out from the motor shaft to the fan shaft through a coupling. The fan shaft is mounted on two rolling bearings; Scheme 5: the drive is carried out from the motor shaft to the fan shaft via a belt drive. Depending on the task, the fans are made of various types of steels. This can be a corrosion-resistant stainless steel version, both of the entire fan with a frame, and only its flowing part. Wear-resistant steels such as Creusabro, Hardox, and Corten alloy steel can be used to solve special tasks.   They can be made using various types of painting, from a standard coating made of polyester powder Qualicoat, to a special powder coating on a matte black silicone base Hotblack. By default, the fans are painted in RAL 9005 Jet Black, on request in any color from the RAL catalog.   The fans have a certificate of conformity for the movement of explosive gas-air media classified in subgroups IIA, IIB, IIC. The level of explosion protection, the subgroup of equipment and the temperature class of the fans in the assembly are determined in accordance with the explosion protection marking of the electric motor used. They are equipped with electric motors of imported (Siemens, BARTEC, WEG, etc.) and domestic (VEMZ, ELDIN, Uralelectro, etc.) production.   Additional equipment:   heat- and noise-insulating housing; flexible inserts for the suction and exhaust pipes; vibration isolators; service hatches; drainage pipes; silencers; grilles and safety nets; air valves with electric or pneumatic drive, manually operated; the guiding device.   The equipment is manufactured according to the Technical specifications (Checklist) A Customer for a specific Project (Object). Warranty obligations apply to all manufactured equipment. The cost, quantity and terms of manufacture (delivery) are negotiated additionally at the conclusion of the contract. Production is in the Russian Federation.

Air valves Designed for use in ventilation and air conditioning systems.   Two series are available:   - control and shut-off valves of models L, R, H, T, S, M;   - inverse gravitational effects of the L, S models.   A large selection of cross sections and options, materials and actuators. They are equipped with SIEMENS and BELIMO electric drives, CAMOZZI pneumatic drive. The valves comply with safety and energy saving requirements.    A detailed description of the valve models below is available on request:   lightweight cut-off model L; universal regulating valves with symmetrical flap opening model R; universal shut-off valves with parallel opening of the flaps model H; shut-off valves with thermal rupture model T; high-density regulating and shut-off valves model S; high-density regulating and shut-off valves model M; Gravitational action single-leaf model L; Gravitational action lobe model S (VO,VI, H).   The equipment is manufactured according to the Technical specifications (Checklist) A Customer for a specific Project (Object). Warranty obligations apply to all manufactured equipment. The cost, quantity and terms of manufacture (delivery) are negotiated additionally at the conclusion of the contract. Production is in the Russian Federation.

Regulating nodes  They are designed to regulate the parameters of the coolant in central air conditioning, refrigeration, air heating systems, as well as for strapping air heat curtains. They are supplied in basic and extended configuration, for systems with dependent and independent connection to a heat source. Depending on the purpose and configuration, they are supplied complete with 3-way and 2-way (optional) valves with electric drives, shut-off ball valves, thermomanometers and circulation pumps from well-known world brands. The connecting elements of the pipeline are made of high-quality materials and fittings with the possibility of flanged (standard sizes 16...63) or threaded (standard sizes 0.63...10) Connections.   For each standard size of the unit, depending on the flow rate, the optimal type of control valve, pump performance, pipe diameters and fittings are selected, which allows for reliable circulation of the coolant and, as a result, air heating in accordance with the specified parameters.   The equipment is manufactured according to the Technical specifications (Checklist) A Customer for a specific Project (Object). Warranty obligations apply to all manufactured equipment. The cost, quantity and terms of manufacture (delivery) are negotiated additionally at the conclusion of the contract. Production is in the Russian Federation.

INDIVIDUAL HEATING POINTS Advantages:   OWN MODERN PRODUCTION; DEVELOPMENT IN ACCORDANCE WITH SP 41-101-95 "DESIGN OF THERMAL POINTS"; THE LAYOUT OF THE BLOCKS TAKES INTO ACCOUNT THE FEATURES OF THE ROOM LAYOUT; CRIMPING OF ALL COMPONENTS OF THE PRODUCT BEFORE SENDING TO THE CUSTOMER; COMPONENTS FROM THE WORLD'S LEADING MANUFACTURERS; ARGON ARC WELDING, SEMI-AUTOMATIC WELDING; POWDER COATING OF PIPELINES; FULL FACTORY READINESS WITH INSTALLATION OF THERMAL INSULATION; RIGID WELDED FRAME CONSTRUCTION; FULL CONTROL AT ALL STAGES OF PRODUCTION; AUTOMATION OF PROCESSES; THE ABILITY TO CONNECT TO THE DISPATCHING SYSTEM (MODBUS RTU RS-485, ETC.); EXTENDED WARRANTY. An individual thermal point (ITP) is an engineering and technical product consisting of elements of hydraulic systems combined into functional blocks and designed to account for, control and convert the parameters of the liquid at the inlet into the required parameters at the outlet, ensuring the design flow of energy transfer processes in heat consumption systems at construction sites.   A thermal point is a product of maximum factory readiness, consisting of one or more blocks, which allows solving heat supply problems for heating, ventilation and hot water supply systems.   Depending on the requirements of the technical specification, the Customer's wishes and the characteristics of the facility, the thermal point may consist of the following blocks: a node for entering and accounting for thermal energy, heating, ventilation, and hot water supply.   All thermal points are equipped with control cabinets by default for the implementation of:   control of temperature parameters in accordance with temperature conditions; control of pumping groups; remote monitoring. The equipment is manufactured according to the Technical specifications (Checklist) A Customer for a specific Project (Object). Warranty obligations apply to all manufactured equipment. The cost, quantity and terms of manufacture (delivery) are negotiated additionally at the conclusion of the contract. Production is in the Russian Federation.

Special equipment Our company has extensive experience in the development, design and manufacture of special ventilation systems for various technological processes. Our experience and modern production allows us to implement ventilation equipment of any complexity for technologies related to heating, cooling, humidification. We produce special ventilation equipment for such technological processes as painting, drying and washing chambers, ventilation of shot blasting chambers, technologies related to the supply of CO2 to greenhouse complexes, ventilation and heating of premises using gas heaters, fans for moving various media, including aggressive ones, with temperatures up to 500 ℃ and pressure up to 30,000 Pa.   The equipment is manufactured according to the Technical specifications (Checklist) A Customer for a specific Project (Object). Warranty obligations apply to all manufactured equipment. The cost, quantity and terms of manufacture (delivery) are negotiated additionally at the conclusion of the contract. Production is in the Russian Federation.

Air-heat curtains 2 series with an effective air jet length of 4 and 7 m; 4 nozzle length options 1.2, 1.8, 2.4, 3m; high-pressure axial fans of high performance; water heaters, electric, without heating; horizontal and vertical mounting; built-in brackets and frame for vertical mounting; blinds for adjusting the direction of air flow.  Designed for horizontal and vertical installation in large doorways of warehouses, industrial buildings, logistics centers and cargo terminals.    Create a dense directional cutting-off air flow in the entrance area, preventing the formation of drafts. They ensure a comfortable stay of people in workplaces near open doorways and automatic gates, even if they are open for a long time.   Models with built-in heaters, in addition to the sliding action, effectively compensate for heat loss through open entrance groups, providing a comfortable temperature in the area bordering the street.  In addition, curtains with heaters can be used as standby heating systems, performing the function of fan heaters or complementing their performance in the event of extremely low outdoor temperatures.    Execution:   - general industrial (galvanized steel with white polymer coating RAL 9003); - corrosion resistant (stainless steel).   Additionally supplied:   - automation cabinet; - mixing unit.   Separate lines of curtains with gas heaters and a special industrial series have been developed.   The equipment is manufactured according to the Technical specifications (Checklist) A Customer for a specific Project (Object). Warranty obligations apply to all manufactured equipment. The cost, quantity and terms of manufacture (delivery) are negotiated additionally at the conclusion of the contract. Production is in the Russian Federation.

FAN HEATERS They are designed to heat the internal air by recirculating it through a built-in liquid or electric type heater. They are used as an air heating system for commercial and industrial premises.  They are supplied in maximum factory readiness complete with a mounting bracket and a remote control (optional).   Advantages   liquid or electric heater; low-noise and high-performance fans; aerodynamic adjustable blinds; angle-adjustable mounting bracket; the control unit; automation cabinet; remote control; easy installation; modern design. Design features   The body of the unit is made of high-quality powder-coated steel. The low-noise and high-performance fans in the composition will provide a high level of comfort. The built-in heat exchanger can be electric or liquid type (copper-aluminum or completely stainless steel).  Aerodynamic blinds effectively distribute the air flow, ensuring its uniform mixing and a comfortable temperature throughout the entire volume of the room.  The mounting bracket of the unit to the wall allows you to securely fix it and adjust the angle of inclination and rotation relative to the vertical and horizontal planes.   The equipment is manufactured according to the Technical specifications (Checklist) A Customer for a specific Project (Object). Warranty obligations apply to all manufactured equipment. The cost, quantity and terms of manufacture (delivery) are negotiated additionally at the conclusion of the contract. Production is in the Russian Federation.

Automatic control systems of our production are modern, comprehensive solutions in the field of automation and protection of climate systems at civil and industrial construction facilities. They are manufactured both in standard design and on an individual order, taking into account all regulatory requirements in the field of safety and technical regulations of the Customs Union TR CU 004/2011 and 020/2011.   For the convenience of the consumer, standard circuit solutions are offered that implement a set of measures to ensure the smooth operation of the ventilation system and climate control equipment.   It is possible to manufacture installations with an integrated automation system on the principle of "on and running", which reduces the amount of design and installation work, as well as eliminate errors during installation and commissioning. The built-in automation provides for the installation of frequency converters and sensors with their disconnection in the control cabinet on the installation body.    The equipment is manufactured according to the Technical specifications (Checklist) A Customer for a specific Project (Object). Warranty obligations apply to all manufactured equipment. The cost, quantity and terms of manufacture (delivery) are negotiated additionally at the conclusion of the contract. Production is in the Russian Federation.

COMPACT SUSPENDED SUPPLY AND EXHAUST SYSTEM WITH RECUPERATOR AND INTEGRATED AUTOMATION   Compact serial suspended supply and exhaust system, designed in an ultra-compact housing for underfloor mounting. It is equipped with a high-efficiency built-in heat exchanger as standard.  It has a built-in automation system, fully ready for operation, the ability to remotely control parameters from a remote control, from a smartphone, from the top level of the automated control system (ModBus RTU RS485, TCP/IP).   The installation is fully tested in the factory, all operating algorithms and security elements are tested.   Advantages:   it is produced in 7 standard sizes; capacity from 300 to 4,000 m3/h; highly efficient recuperators; ultra-compact housing; low noise level; the use of non-combustible materials according to SP 60.13330.2020; fire safety, high thermal and noise insulation; compliance with the principle of "turned on and running"; built-in automation and control system; remote control, from a smartphone, from the top level of the automated control system (ModBus RTU RS485, TCP/IP); maximum factory readiness; minimum on-site installation work; optimal microclimate in the off-season thanks to an electric heater and a heat exchanger. Design features      The ultra-compact low-height housing is specially designed for underfloor mounting; panels with a thickness of 27 mm with a filler made of non-combustible basalt ultrathin fiber provide a high level of thermal and noise insulation and meet fire safety requirements; the monoblock housing is made of galvanized steel with a polymer coating, made using frameless technology; due to the reliable sealing of the joints, high tightness is achieved and leaks through the housing are eliminated; quick and easy access to internal elements thanks to the use of ergonomic fittings; pre-installed mounting brackets; condensate drainage system. Functional elements and content   fan; recuperator; filter; electric heater. Built-in automation   The built-in automation is fully ready for operation. The control system combined with the power unit is installed, disconnected, configured and tested. The electric motors are connected, the sensors are partially mounted on the installation body.   Additional modules   If necessary, the installation is supplemented with optional modules of appropriate sizes and capacities, such as a damper, a preheating and reheating heater (electric or water), a cooler (water or direct evaporation), a fine filter, a muffler, etc.  The equipment is manufactured according to the Technical specifications (Checklist) A Customer for a specific Project (Object). Warranty obligations apply to all manufactured equipment. The cost, quantity and terms of manufacture (delivery) are negotiated additionally at the conclusion of the contract. Production is in the Russian Federation.

COMPACT SUPPLY AND EXHAUST SYSTEM WITH RECUPERATOR AND INTEGRATED AUTOMATION   Compact serial supply and exhaust system for comfortable ventilation, requiring minimal installation space.   It is equipped with a highly efficient built-in plate or rotary heat exchanger. It has a built-in automation system, fully ready for operation, the ability to remotely control parameters from a remote control, from a smartphone, from the top level of the automated control system (ModBus RTU RS485, TCP/IP). The installation is fully tested in the factory, all operating algorithms and security elements are tested.   Advantages   it is presented in 8 standard sizes; capacity from 500 to 12000 m3/h; highly efficient rotary, countercurrent and cross-flow plate heat exchangers; compact monoblock housing; minimum installation space; low noise level; fire safety, high thermal and noise insulation; the use of non-combustible materials according to SP 60.13330.2020; compliance with the principle of "turned on and running"; built-in automation and control system; remote control, from a smartphone, from the upper level of the automated control system (ModBus RTU RS485, TCP/IP); maximum factory readiness, minimum on-site installation work; optimal microclimate in the off-season thanks to an electric heater and a heat exchanger. Design features   monoblock housing made of galvanized steel with polymer coating; panels with a thickness of 50 mm with a filler made of non-combustible basalt ultrathin fiber provide a high level of thermal and noise insulation and meet fire safety requirements ; the three-circuit type of sealing of the panels ensures reliable tightness; the metal elements of the frame ensure the reliability and strength of the housing, protecting it from damage; version with universal (vertical and horizontal) connection of circular air ducts for quick orientation change; quick and easy access to internal elements thanks to the use of ergonomic fittings; condensate drainage system. Functional elements and content   fan; recuperator; filter; electric heater. Built-in automation   The built-in automation is fully ready for operation. The control system combined with the power unit is installed, disconnected, configured and tested. The electric motors are connected, the sensors are partially mounted on the installation body.   Additional modules   If necessary, the installation is supplemented with accessories of appropriate sizes and capacities, such as an air valve, a preheating and reheating heater, a cooler, a pre-filter, a muffler, etc.   The equipment is manufactured according to the Technical specifications (Checklist) A Customer for a specific Project (Object). Warranty obligations apply to all manufactured equipment. The cost, quantity and terms of manufacture (delivery) are negotiated additionally at the conclusion of the contract. Production is in the Russian Federation.