Automated warehouse of elevator type CUBER of CSort company - 85531

Industrial PCB Electronic Board Design, Mass Production, Embedded Software, PLC Software, Control Panel Production, Industrial Machine Automation, Data Logger, Electronic Circuit Design, Electronic Board Design, Circuit Design with ESP32, Arduino Software, Arduino Circuit Design, Arduino Software Development etc. . Machine Automation, Industrial Automation, PLC Programming, Data Logger, IoT Systems, Control Systems, Control Panel, Automation Panel Production, Interface Software.

Advantages and Features — ① Integrated heavy-duty cast steel cutter head. Advantage 1: The knife holder is not easy to deform and is durable. Advantage 2: The lowest point of the knife edge is higher than 80% of the same types of equipment on the market, making it easier to cut large scrap steel and more goods. ② The fully enclosed adjustable guide rail also has an automatic injection lubrication system. Advantages: It effectively protects the cutter head for smooth shearing, is not easy to deflect, and cuts thick and thin materials without pressure. ③ The gantry frame is welded and fixed with high-strength, multi-channel rib plates. Advantages: The overall structural strength of the frame is higher. ④ Our company all adopts a double-layer material box lining design with wear-resistant plates. Advantages: firstly, to increase the strength of the material box; secondly, to protect the bottom of the material box from wearing for a longer period of time. The wear-resistant strength far exceeds that of conventional alloy steel plates. ⑤ The side ribs of the material box are thicker and denser than the same type of equipment on the market. Advantages: anti-collision, durable, and non-deformable ⑥ The height of the pressing head is higher than that of the same type of equipment on the market. Advantages: It is easier to pre-press when processing large scrap steel and large quantities of goods. ⑦ The material box can be equipped with conventional open type or door cover type. Advantages of the door cover type: It is not easy to lift up and splash when dealing with aniseed, long scrap steel, thrown goods, etc. The door cover also adopts wear-resistant plate. ⑧ The hydraulic station adopts a hot and cold isolation system to speed up cooling, and a dual filtration system of oil suction filtration and return oil filtration to reduce pipeline clogging. ⑨ Adopt quick disassembly and assembly of valve block.

Main parameters: Load capacity: 100 kg / 150 kg / 250 kg / 350 kg / 550 kg / 750 kg Coverage radius: up to 4500 mm Lifting height: up to 2000 mm Control system options: Automatic adjustment of load weight loss - ShBM-PP-A (only for lifting capacity up to 350 kg) Manual adjustment of load weight loss - ShBM-PP-R Execution options: Floor-standing (on a column) Suspended (on crane tracks) Installation options (for floor-standing version): Base for stationary fastening to the floor Driven trolley (for fastenings on crane tracks) Platform for moving by forklift Folding support legs

INDIVIDUAL HEATING POINTS Advantages:   OWN MODERN PRODUCTION; DEVELOPMENT IN ACCORDANCE WITH SP 41-101-95 "DESIGN OF THERMAL POINTS"; THE LAYOUT OF THE BLOCKS TAKES INTO ACCOUNT THE FEATURES OF THE ROOM LAYOUT; CRIMPING OF ALL COMPONENTS OF THE PRODUCT BEFORE SENDING TO THE CUSTOMER; COMPONENTS FROM THE WORLD'S LEADING MANUFACTURERS; ARGON ARC WELDING, SEMI-AUTOMATIC WELDING; POWDER COATING OF PIPELINES; FULL FACTORY READINESS WITH INSTALLATION OF THERMAL INSULATION; RIGID WELDED FRAME CONSTRUCTION; FULL CONTROL AT ALL STAGES OF PRODUCTION; AUTOMATION OF PROCESSES; THE ABILITY TO CONNECT TO THE DISPATCHING SYSTEM (MODBUS RTU RS-485, ETC.); EXTENDED WARRANTY. An individual thermal point (ITP) is an engineering and technical product consisting of elements of hydraulic systems combined into functional blocks and designed to account for, control and convert the parameters of the liquid at the inlet into the required parameters at the outlet, ensuring the design flow of energy transfer processes in heat consumption systems at construction sites.   A thermal point is a product of maximum factory readiness, consisting of one or more blocks, which allows solving heat supply problems for heating, ventilation and hot water supply systems.   Depending on the requirements of the technical specification, the Customer's wishes and the characteristics of the facility, the thermal point may consist of the following blocks: a node for entering and accounting for thermal energy, heating, ventilation, and hot water supply.   All thermal points are equipped with control cabinets by default for the implementation of:   control of temperature parameters in accordance with temperature conditions; control of pumping groups; remote monitoring. The equipment is manufactured according to the Technical specifications (Checklist) A Customer for a specific Project (Object). Warranty obligations apply to all manufactured equipment. The cost, quantity and terms of manufacture (delivery) are negotiated additionally at the conclusion of the contract. Production is in the Russian Federation.

Interactive table BASIC 43 or LigaSmart IT 43, equipment with adjustable tilt angle, atmospheric lighting and 4K resolution.

Multi-touch touch table LigaSmart IT 32 or BASIC 32, equipment included in the register of MINPROMTORG and REP, is intended for drawing, annotation on top of an image, information and navigation. The adjustable tilt angle allows several people to work with the touch table at the same time. Atmospheric lighting attracts attention.

The Gruzopodyem plant produces high-strength steel traverses for various types of cargo in accordance with TU-3178-004-87879481-2010, in accordance with the requirements of TR TS 010/2011. The devices are designed for lifting and transporting loads of any type, however, they are more often used when working with complex ones: large-tonnage, long-length, non-standard and with a displaced center of gravity. Additional attachments allow you to grab the load evenly and prevent the slings from twisting and bending. With restrictions on the lifting height or reach of the crane boom, it allows you to lift the object to the maximum height. The type of traverse is selected based on the design of the lifted product: Linear - have the highest load capacity of 1000.0 tons. As a rule, they are used for voluminous and long items up to 12 meters. They are a beam with fastening at the center or edges. Spatial - withstand loads up to 200.0 tons. Designed for bulky cargo of non-standard shape, no larger than 25x5 m. They are rectangular and H-shaped with fastenings along the edges and behind the center. For containers - a specialized type of device adapted to the tasks of cargo terminals. They are divided into frame and linear, lift up to 30 tons. For pipes and towels - designed for the oil and gas industry. Are applied to transportation of any cylindrical products. We offer you in our person a reliable partner, from cooperation with which you get: Optimal prices for products, as you contact the manufacturer directly Deliveries exactly on time Goods with guaranteed quality Professional advice Possibility of manufacturing equipment to order Installation services Delivery services Possibility to purchase equipment in leasing Opportunity to insure cargo during its transportation.

Plant "Gruzopodyem" manufactures industrial tilters for overturning and rotation around its axis of large, long and cylindrical loads. These devices forcibly and purposefully shift the center of gravity of the load. They significantly speed up production processes at enterprises, as well as increase the degree of work safety. They are used in warehouses, construction sites, machine-building plants and metalworking enterprises. In a basic complete set are calculated on work at a temperature from -20 °C to +40 °C. The type of tilter is selected based on the tasks of production: Suspended — used for tilting any hard materials. Fixed on racks, or associated with lifting equipment. The device consists of a traverse, rollers and slings. According to the type of control, they are divided into manual, manual with a gearbox and electric. The latter have the highest carrying capacity of 80 tons. Stationary - used to rotate pipes and I-beams during welding. Consist of two or more sections, depending on the length of the load. Withstand up to 80 tons. Supplied with electric drive only. For rolls, they overturn any cylindrical loads weighing from 1.5 tons at an angle of 90 degrees: coils of wire, rolls of steel, paper. They belong to a stationary type of equipment, driven by a hydraulic or electric type of drive. We produce according to TU-3178-005-87879481-2010 in accordance with the requirements of the Technical Regulations of the Customs Union 010/2011 "On the safety of machinery and equipment". We offer you in our person a reliable partner, from cooperation with which you get: Optimal prices for products, as you contact the manufacturer directly Deliveries exactly on time Goods with guaranteed quality Professional advice Possibility of manufacturing equipment to order Installation services Delivery services Possibility to purchase equipment in leasing Opportunity to insure cargo during its transportation.

We produce transport trolleys on rails and wheels according to TU 28.22.18-017-87879481-2020 with dimensions not exceeding LxW of 6.0x3.5 meters. Self-propelled transfer platforms allow you to move any cargo weighing up to 80 tons between work areas. They are used in warehouses, metallurgical industries, reinforced concrete plants and in other industries where it is necessary to move cargo. Virtually no restrictions in terms of use and does not require additional equipment for operation. Unlike stationary lifting equipment at the enterprise, they can connect not only work areas within the workshop, but also move between them. Types of manufactured bogies: On rails - move only on rails. As a rule, the path for them is laid in a straight line, without turns, however, they can also pass along a curved segment. Equally used both indoors and outdoors. In the basic version, the operating temperature is calculated from -20°C to +40°C. The drive type can be manual or electric. On wheels - they are performed only with an electric type of travel and in category U3, that is, for indoor operation. Able to move on a flat floor, in the direction of "back and forth". Special - with lifting table or built-in welding rotator. Transfer platforms can be manufactured in general industrial and fireproof versions. Upon request, we supply with additional options: radio control, soft start, protective coatings, devices for securing cargo and others. We offer you in our person a reliable partner, from cooperation with which you get: Optimal prices for products, as you contact the manufacturer directly Deliveries exactly on time Goods with guaranteed quality Professional advice Possibility of manufacturing equipment to order Installation services Delivery services Possibility to purchase equipment in leasing Opportunity to insure cargo during its transportation.

The Gruzopodyem plant develops and manufactures crane runways and overpasses according to individual projects - according to the drawings of the customer or our own design bureau. Our company is a member of the SRO for the design of capital construction facilities, as well as a SRO for the construction, reconstruction and overhaul of capital construction facilities, which allows us not only to manufacture equipment, but also to design it, as well as to carry out installation at the Customer's site. Thus, we carry out a full range of works: we design, manufacture, deliver and install crane runways and overpasses. The product warranty is up to 24 months. Crane tracks are designed for overhead movement of overhead and support cranes in production shops, warehouses, transport hubs and construction sites, both indoors and outdoors. Crane tracks are installed on load-bearing columns, walls, floors of the building. Supports of this type allow you to combine several sections into a single assembly line and do not occupy the usable area of the enterprise. Overpasses are a completely independent structure with its own foundation, which allows you to organize the necessary working area anywhere in the enterprise. We offer you in our person a reliable partner, from cooperation with which you get: Optimal prices for products, as you contact the manufacturer directly Deliveries exactly on time Goods with guaranteed quality Professional advice Possibility of manufacturing equipment to order Installation services Delivery services Possibility to purchase equipment in leasing Opportunity to insure cargo during its transportation.

The plant produces gantry and semi-gantry cranes according to TU-3155-011-87879481-2015. They belong to the bridge type of lifting equipment and are designed for installation and loading and unloading of goods weighing up to 50.0 tons. They are used in construction, logistics, industry. They can be used both indoors and outdoors, as a standard at temperatures from -20 to +40 ° C (other versions are possible). Easy to operate and maintain, have a long service life, save time and money spent on production tasks. You can order from us: - KK - gantry crane - with a suspended cargo monorail trolley moving along the driving beam of the bridge. - KKD - double-girder gantry crane - with a supporting cargo trolley moving from above along the bridge beam, on which the mechanisms for lifting the load and moving the trolley itself are installed. - KPK - semi-gantry crane - with a suspended cargo monorail trolley moving along the driving beam of the bridge. The main characteristics of manufactured gantry and semi-gantry cranes: Load capacity: up to 50.0 t Span length: up to 32.0 m Lifting height: up to 36.0 m The crane is controlled by a cable remote control with an emergency stop button. It is possible to install the option: radio control, control from the cab to increase the convenience and safety of operation. The mechanism for lifting and moving cargo is a hoist (hoist), which moves along the crane span or a stationary hoist mounted on a mobile trolley. The load-handling body is a hook suspension suspended on a rope rope stored in its drum Operating mode: A4 and higher according to ISO 4301/1 Execution: OPI / PBI To increase reliability, safety, and convenience of work, it is recommended to install additional options LLC Gruzopodyom has Certificates of Conformity TR CU 010/2011 "On the safety of machinery and equipment" and TR CU 012/2011 "On the safety of equipment for operation in explosive environments". We provide services for the design, production, delivery and installation of products on the territory of the Russian Federation and the CIS. By default, the equipment is painted orange RAL 2004. Other colors are available on request. We offer you in our person a reliable partner, from cooperation with which you get: Optimal prices for products, as you contact the manufacturer directly Deliveries exactly on time Goods with guaranteed quality Professional advice Possibility of manufacturing equipment to order Installation services Delivery services Possibility to purchase equipment in leasing Opportunity to insure cargo during its transportation.

The plant "Gruzopodyem" produces console cranes on a column, wall-mounted and special according to TU-31 5920-006-87879481-2013 and TU-31 5922-170-61817212-2012. The basis of the design is an arrow, which is installed on its own support or part of the building: a column or wall. Used to move any cargo weighing up to 16.0 tons. Convenient for working indoors - they practically do not take up useful space, while covering up to 360 ° of the working area - therefore they are often used in production workshops and warehouses. When installing additional options, they can be used on the street. The operating temperature in the basic configuration is from -20 to +40 °С. On request, execution from -40 °С is possible. The main characteristics of manufactured jib cranes: Load capacity: up to 16.0 tons Boom radius: up to 12.0 meters Angle of rotation: up to 360° Lifting height: up to 36.0 meters Crane version: OPI/PBI/VZI cable remote control with emergency stop button. It is possible to install the option of radio control for remote control. The boom of manual cranes is rotated by pulling, lifting, lowering the load either manually or using an electric mobile hoist and a control panel. The mechanism for lifting and moving the load is a hoist (hoist), which moves along the crane boom. of additional options LLC Gruzopodyem has Certificates of Conformity TR CU 010/2011 “On the safety of machinery and equipment” and TR TS 012/2011 “On the safety of equipment for operation in explosive environments”. We provide services for the design, production, delivery and installation of products on the territory of the Russian Federation and the CIS. By default, the equipment is painted orange RAL 2004. Other colors are available on request. We offer you in our person a reliable partner, from cooperation with which you get: Optimal prices for products, as you contact the manufacturer directly Deliveries exactly on time Goods with guaranteed quality Professional advice Possibility of manufacturing equipment to order Installation services Delivery services Possibility to purchase equipment in leasing Opportunity to insure cargo during its transportation.